FRESA 706.096.11 GAMBO Da 15 mm

affleurer blower with rotation, carbide 2 cutting edges. Diameter: 3/8in. Cutting length (I): 12.7 mm/1/2 ". Overall Length (L): 55.5 mm. Shank Diameter: 6 mm. (_) cutting angle: 0 °. Rotation: Right. This type of core has been designed to affleurer on laminate or for quick applications with a template. Suitable for all needs. Strawberry equipped with carbide cutting edges for a long life. This strawberry is excellent for mortices Passantes to properly. With a core box router bit 013 mm (711.130.11) make a slot mortise of about 5 mm in wood, where you want to achieve the maximum power output. Then, with a drill 013 mm (517.130.31) to make a hole in one end of the groove. To turn the piece. With a affleurer blower 012.7 mm Cutting Length message above the thickness of the artwork, build the guide on the edge and complete the mortice.Reference: cm-cmt70609611High-speed steel router: affleurer with straight cut, 9.5 x read. 12.7 x Q. 6 mm – 706.096.11 – CMTType: affleurer – Dimensions:.. 12.7 mm

• With these CMT flush cutters, you can master any task related to flush and copy milling.
• Especially the stronger diameters are also designed for difficult tasks.
• These tools are equipped with carbide cutting edges to ensure long durability.
• RECOMMENDATIONS These cutters are perfect for making tenon holes through the wood. With a straight cutter Ø13 mm (711.130.11), a 5 mm deep channel is created on the side of the piece of wood on which the pin hole is to be performed. Use a diameter 13 mm (517.130.31) spiral tip to drill a hole in one end of the channel through the wood.
• Turn the wood around to finish the tenon hole. Use a diameter 12.7 mm cutter with a cutting length that is slightly longer than the thickness of the bar, and with the guide pad track the path of the channel made on the opposite side of the wood. Shopping tips: after resharpening, use undersized bearings. Perform several passes with care to avoid breakage. Please note: Not guaranteed if used inappropriately.